PRODUCTS
Home - INTERIORS - FLOORING - Preparation
INTERIORS
Tot. products: 13
- FLOORING - Preparation
Preparation for indoor flooring: bleach solutions and much more!
Prepare the surfaces to be treated in the best possible way: get fast results with our professional solutions, from bleach solutions to wax remover and discover the full line for flooring.
code 0075HW
Special reactive agent for oak. It reduces the yellowing
Special reactive agent for oak. It reduces the yellowing
code NAT0075
One-component waterbased whitener for wood. Applied by brush
One-component waterbased whitener for wood. Applied by brush
code 0062
Two-component product ideal for bleaching wooden surfaces.
Two-component product ideal for bleaching wooden surfaces.
code 1350XX
One Go is an Odourless water-based filler with low specific weight
One Go is an Odourless water-based filler with low specific weight
code 1770XX
Waterborne filler, formulated with high quality raw materials and
Waterborne filler, formulated with high quality raw materials and
code 1555XX
Water-based Pore filler, sprayable. Eco-friendly and
Water-based Pore filler, sprayable. Eco-friendly and
code 1800XX
It's a fast drying product based on wood powder, ideal for the
It's a fast drying product based on wood powder, ideal for the
code 1650XX
Filler compound with polyester resins and special mineral powders
Filler compound with polyester resins and special mineral powders
code 0052
It's a ready to use binding resin for the individual preparation
It's a ready to use binding resin for the individual preparation
code NAT0052
It's a ready to use binding resin for the individual preparation
It's a ready to use binding resin for the individual preparation
×
LEGENDA
CERTIFICATIONS AND CONFORMITY
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
Borma Wachs products are tested and approved by IBR, Intitut für Baubiologie Rosenheim. The performed analysis certify that our products are complying in terms of VOC content, biocides, heavy metals and radioactivity, guaranteeing full eco-compatibility with Green Building principles.
This product's safety is guaranteed more than just by EN 71-III certificate. Its safety for children is supported by DIN 53160/1-2 and DIN 68861/1 (Resistance to saliva and sweat; Resistance to cold liquids ) certificates as well. The product does not release harmful substances even when in contact with common alimentary liquids or mucuous membrane.
The product acts as fire retardant
CERTIFICATIONS AND COMPLIANCE
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.
The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.
The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.