Special dust filler with wood powder, specific for wooden surface but suitable also for walls. It is the ideal solution for filling of wood defects and for reconstruction of missing parts. It adheres perfectly on each kind of surface. Colors are resistant to sunlight. Suitable for over-lacquering with PU, acrylic, epoxy, UV and waterborne lacquers.
|0056XX||12,5 Kg. Various Colors|
|0056XX.1||1 Kg. Various Colors 06 pcs.|
In a clean container, mix Dust Filler with water, in ratio filler: water 3:1. The amount of water can change depending on the desired viscosity.
Apply the prepared filler on a clean and degreased surface, on the defect. Where possible apply an abundant layer in order to prevent natural loss of volume of the filler during drying.
Wait 4-6 hours for complete drying of the filler then proceed to a further application, if necessary, or to staining/lacquering.