Odourless, light-stable and ecological water-based putty for wood.
The white version is also suitable for smoothing plaster.
Formulated to minimise shrinkage on drying and to allow colours to be inter-mixable with each other to create limitless shades.
Available Colours: 01 POPLAR / 04 Fir / 05 Pine / 08 Natural Wood / 10 Larch / 17 Teak/ 30 Cherry / 42 Beech / 48 MEDIUM OAK / 50 White / 51 Oak / 53 Light Walnut / 54 Douglas / 58 Rosewood / 59 Medium Walnut / 62 Mahogany / 63 Dark Walnut / 65 Ash / 146 Wenge
Code Desc. Pack.
EN1500XX 250 gr. 12 pcs.
1510XX.200 200 gr. tube 12 pcs.
1510ESP.XXX 250 gr. Tubes display, 6 colours 36 pcs.
EN1520XX 500 gr. 12 pcs.
EN1550XX 1 Kg. 12 pcs.
EN1570XX 5 Kg. 04 pcs.
Choose the required shade (preferably darker than the surface to be treated) and apply the filler directly onto the cleaned fault.
Leave to dry for 6/8 hours, depending on the thickness of the coat.
Sand off any excess.
Remove any dust or grease and paint the surface with either solvent based products and water based (Holzfarbe, Water-based pastel stains, Spirit stains).
Once dry it can be overpainted (Holzwachs spray) or treated with wax (Beeswax in paste form).