Can wood treatments become a masterpiece? Come and see our gallery

The right protection - UK

Transparent finishes on Ash generally not ideal for outdoors and consequent considerations on oak often in use
The power of the right protection!
Ash (notoriously poor for external use!) with different systems on.
Been outside for 11 months in all weathers, sat face up to the elements.
So a sealer with the oil definitely helps significantly

Do you apply UV oil over the NA holzwachs lazur 3X1?
Yes, UV oil was the final coat.
Panels 1 & 2 are the way to go IMO
I find similar , that the waterborn systems protect much better for dirt pick -up /fouling .
Bit logical as you seal them on top . But I have not yet found a solvent based transparent system that protects as well as the waterborn.
For sure easier to apply and maintain , but all objects I did the last 3 years with only holzwach lazur and uv oils , cleanse to natural effect , are grey /dirty /black ….
Nothing close to the test pieces in Venice (the garden houses).

NAT3305XX-3X1

right_protection_uk_20230502_1
right_protection_uk_20230502_2
right_protection_uk_20230502_3
right_protection_uk_20230502_4
right_protection_uk_20230502_5
right_protection_uk_20230502_6
right_protection_uk_20230502_7
right_protection_uk_20230502_8
right_protection_uk_20230502_9
right_protection_uk_20230502_10
right_protection_uk_20230502_11
right_protection_uk_20230502_12
right_protection_uk_20230502_13
right_protection_uk_20230502_14

LEGENDA

CERTIFICATIONS AND CONFORMITY
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.

Borma Wachs products are tested and approved by IBR, Intitut für Baubiologie Rosenheim. The performed analysis certify that our products are complying in terms of VOC content, biocides, heavy metals and radioactivity, guaranteeing full eco-compatibility with Green Building principles.

This product's safety is guaranteed more than just by EN 71-III certificate. Its safety for children is supported by DIN 53160/1-2 and DIN 68861/1 (Resistance to saliva and sweat; Resistance to cold liquids ) certificates as well. The product does not release harmful substances even when in contact with common alimentary liquids or mucuous membrane.

The product acts as fire retardant

CERTIFICATIONS AND COMPLIANCE
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.

The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.

CERTIFICATIONS AND COMPLIANCE
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.

CERTIFICATIONS AND COMPLIANCE
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.

Borma Gallery detail - EXTERIORS

LEGENDA