WE SUPPORT
ACES POKER
The restoration of wood in 4 moves
  

August 06, 2020

*|MC:SUBJECT|*
If you don't see correctly the image/texts, enable permissions in your mail browser.
The restoration of wood in 4 moves
Consolidating
Apply one layer of Holz Haerter, consolidating agent, on the most wasted areas. Let the product work for about 6 hrs.
TECHNICAL DATA SHEET
Removing
Apply Radikal Abbeizer, lacquer remover, to strip the support and to remove excesses of consolidating agent. Remove the stripped lacquer by spatula. Use directly lacquer remover with steel wool ‘000’ to remove completely the old layer from stubborn areas. Clean the defect by metal brush.
TECHNICAL DATA SHEET
Filling
Repair missing parts with Holzmasse K2. Insert some wooden pieces to grant better resistance of the repaired area. Saw exceeding part after 30’-40’ from woodfiller application. Operate sending by hand or by orbital rotating machine, grit 100-120.
TECHNICAL DATA SHEET
Finishing
Apply a first layer of Dekorwachs Lasur impregnating agent by brush. After about 6hrs, sand slightly, sandpaper grit 120-180. Apply a second layer of Dekorwachs Lasur. After 24hrs apply a third hand of Holzwachs Lasur.
TECHNICAL DATA SHEET
Share Share
Tweet Tweet
Forward Forward
Share Share
www.bormawachs.com
Copyright © 2019 B.P.S. Srl, All rights reserved.

Our mailing address is:
info@bormawachs.it

Want to change how you receive these emails?
You can update your preferences or unsubscribe from this list.
×

LEGENDA

loghettobps

ICON_CERT_EN713
CERTIFICATIONS AND CONFORMITY
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
ICON_CERT_IBR
Borma Wachs products are tested and approved by IBR, Intitut für Baubiologie Rosenheim. The performed analysis certify that our products are complying in terms of VOC content, biocides, heavy metals and radioactivity, guaranteeing full eco-compatibility with Green Building principles.
ICON_CERT_DIN
This product's safety is guaranteed more than just by EN 71-III certificate. Its safety for children is supported by DIN 53160/1-2 and DIN 68861/1 (Resistance to saliva and sweat; Resistance to cold liquids ) certificates as well. The product does not release harmful substances even when in contact with common alimentary liquids or mucuous membrane.
CERT_BFLS1
The product acts as fire retardant
CERT_DGALN_A
CERTIFICATIONS AND COMPLIANCE
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.

The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.