headertop
PRODUCTS
Home / DECORATION - Preparation - Preparation

NATURAQUA SUPER WOOD SEALER - ANTI-TANNIN BASECOAT

code NAT4089-S
whatsapp

img_certICON_LINE_DECORAZIONEICON_ADD_ACQUA

Description

It's a ready for use water based resin dispersion to be used as a wood insulator. Thanks to its high penetration, it is ideal as a first hand treatment on all types of wood, but especially on high tannin woods. Its characteristics allow good deep adhesion into the wood, and make it ideal as a first coat in the case of white trim to prevent yellowing and dark spots on surface.

Packaging

WHITE
Code Desc. Pack.
NAT4090B-S 750ml 06 pcs.
NAT4091B-S 5Lt 02 pcs.
NAT4090.10B-S 10Lt
NAT4090.20B-S 20Lt

TRANSPARENT
Code Desc. Pack.
NAT4090-S 750ml 06 pcs.
NAT4091-S 5Lt 02 pcs.
NAT4090.10-S 10Lt
NAT4090.20-S 20Lt

Method of Usage

1

On a dry, clean and dust free surface apply by brush or roll, the ready to use Borma Super Wood Sealer. Any pre-treatment must be removed.


1

Once ready, apply one or two coats, with a minimum lack of time of 4/6hrs, depending on the support and on the applied quantity.


1

If necessary, lightly sand the surface before the second coat. Once dry, proceed to finish with Shabby or other waterbased finishes for interior or exterior. Preliminary tests are advisable for solvent based finishes.


1

Total drying will be obtained after 24h.

catalogoprodimg