Anti-rust Undercoat is a ready-to-use product, easy to apply, recommended for iron, indoors and outdoors.
High density, it is recommended as primer for iron surfaces, new or to be restored.
Ideal for furniture, gates, fixtures, iron surfaces in general.
|Cod. 6916XXXX||6 x 375ml|
|Cod. 6917XXXX||6 x 750ml|
|Cod. 6918XXXX||2 x 2,5Lt|
|Cod. 6919XXXX||2 x 5Lt|
|Cod. 6915.20XXXX||20 Lt|
Remove residues of greases, powders and old varnishes, especially if they are inconsistent. Remove any rust that may be present as much as possible by sanding, brushing or washing with solvent.
Ready to use, does not need dilution; application by brush or roller is recommended. In case of spray application it is possible to dilute with 10% of DNU016 or Solvoil products.
On external surfaces, apply one or two coats waiting a minimum of 3-4 hours in between. It is advisable to sand lightly before the second coat to ensure maximum adhesion and durability.
Total drying 24 hrs. Continue with the application of the enamel.