Pure 100% natural wood oil extract, obtained by pressing the seed from the nut of the Tung Tree. Tung oil hardens upon exposure to air, resulting in a transparent and non-yellowing coating. Ideal for wood finishing and for the preparation of oil paints and inks. Also suitable for outdoor use. It is indicated on supports in contact with food, such as tables and kitchen cabinets, cutting boards and more.
Conformity to EN71.III Certification Safe for children's toys.
Conformity to IBR Certification for green building issued by the Institute of Rosenheim.
Code 3990 - 12 x 150ml
Code 3991 - 12 x 500ml
Code 3992 - 12 x 1Lt
Code 3993 - 2 x 5Lt
Code 3994 - 1 x 20Lt
Apply by brush or rag. To facilitate application, dilute the first two coats with 50% white spirit.
After at least 30 minutes remove the excess oil using a clean cloth. Interval the applications for at least 24 hours. For subsequent coats, dilute the oil with smaller quantities of solvent, until the pure wood oil is applied.
After the final coat has been applied, leave for 24 hours and wipe over again to improve the drying process, and remove any oil that may have surfaced. 4 coats in total, more will be required for porous or external surfaces.
For better results, lightly rub with steel wool "0000" after each coat.