It's a ready to use binding resin for the individual preparation of Borma Holzmasse. Pasted together with wood sawdust obtained from sanding, it allows to obtain a spreadable paste easily. The binding resin does not change the original colour of the wood and therefore the paste has the same tone of the wood from which the powder has been obtained. The paste can be stained or overlacquered with both solvent and water based products.
Code 0052 - 12 x 1Lt
Code 0057 - 2 x 2,5Lt
Code 0053 - 2 x 5Lt
Code 0054 - 1 x 10Lt
Code 0055 - 1 x 25Lt
Depending on the type of wood, its absorbency, the powder dimensions and the consistence of paste that you want to obtain, the ratio of resin and powder will be between 1 part powder and 3/4 parts resin, so you can spread the product using a spatula.
Apply directly onto the clean surface.
The product dries in 5 /45 mins depending on the applied thickness.
When the surface is dried, proceed with sanding and subsequent treatments.