MULTI-SURFACE WATER- BASED ENAMEL
NAT7202XX.XX
Naturaqua Genesis is a ready-to-use water-based covering enamel available as standard in the matt 25 gloss version.
As a base for tinting, it is also available deep matt 10 gloss, matt 25 gloss, semi-glossy 50 and glossy 80 gloss sheen respectively.
Thanks to the new latest-generation formulation, it adheres to every surface and offers high performance in terms of chemical and mechanical resistance: it is stain-proof, non-yellowing, water-repellent, scratch-proof.
Naturaqua Genesis also stands out for its application characteristics: excellent flow, rapid drying, high coverage in one coat, high levelling power.
During the surface preparation phase, it does not require the application of special primers.
It is a washable product.
The water- based technology makes the product odourless, low VOC emissions and perfect for interior application
• Compliant to EN71.III Safety for children's toys.
• Compliant to French VOC Classe A+.
Code NAT7202XX.750 - 6 x 750ml
Code NAT7202XX.2,5 - 2 x 2,5Lt
LOGIN
Raw wood: Sand the surface with sandpaper, grit 150-180; vacuum the dust, degrease if necessary. On the exterior wood apply Borma Shield primer, code 3630. Painted wood: Remove dust and grease from the surface. If old paint is flaking, preliminary sanding is recommended (150-180 grit sandpaper). Metal: If present, remove rust with sandpaper or abrasive brush and proceed with the application of Waterbased Antirust Undercoat NAT6915XX. Plastic, galvanized sheet metal, glass, ceramic : Lightly sand with 180-240 grit sandpaper, vacuum, degrease and clean. Consider applying Anchoring Undercoat for Difficult Substrates, 6971.
Spread the product on the surface with a brush, spray or a medium-pile roller.
Leave to dry for 4-24 hours.
Apply a second coat to achieve high coverage and uniformity.
Wait 48 hours for complete drying.
LEGENDA
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.
The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.