It's a ready-to-use basecoat, odorless and ecological, easy to apply, recommended for wood, indoors and outdoors.
Of high density, it is recommended in finishing or maintenance cycles of wooden surfaces where an effect of considerable coverage and uniformity is desired and to ensure correct adhesion of the finish. Flowing and elastic, it is characterized by an excellent distension and does not drip.
Standard colours: white, RAL 2004, RAL 7016 and RAL 7035.
Recommendations for application:
To be protected with Waterbased Universal High Coverage 3in1 Enamel
Code WHITE Desc. Pack. |
NAT6911 375 ml 6 pcs. |
NAT6912 750 ml 6 pcs. |
NAT6913 2,5 lt 2 pcs. |
NAT6914 5 lt 2 pcs. |
NAT6910.10 10 lt |
NAT6910.20 20 lt |
Code RAL Desc. Pack. |
NAT6916XXXX 375 ml 6 pcs. |
NAT6917XXXX 750 ml 6 pcs. |
NAT6918XXXX 2,5 lt 2 pcs. |
NAT6919XXXX 5 lt 2 pcs. |
NAT6915XXXX.10 10 lt |
NAT6915XXXX.20 20 lt |
Remove residues of greases, powders and old varnishes, especially if they are inconsistent.
Ready to use, does not need dilution; application by brush or roller is recommended. In case of spray application it is possible to dilute with 10% of water, possibly demineralized.
On external surfaces, apply one or two coats waiting a minimum of 3-4 hours in between. It is advisable to sand lightly before the second coat to ensure maximum adhesion and durability.
Total drying 12-24 hrs. Continue with the application of the enamel.