WATER-BASED SPECIAL SUPER COVERING ENAMEL
NAT690X50-XX
WHITE Enamel is a ready-to-use, eco-friendly and odorless product, very easy to apply even vertically, suitable for any type of support, indoors and outdoors with low VOC. It creates a decorative, water-repellent and weather-resistant film, with low yellowing. Thanks to the special formulation with light-resistant pigments and UV filters, it creates a long-lasting protection.
Smooth and elastic, it is characterised by excellent distension and rapid drying, it does not drip.
Has an anticorrosive effect.
WHITE enamel has a high density, boasts high filling and covering capacity. It is recommended for finishing or maintenance of wooden, metal surfaces as well as walls. It does not require special primers (e.g. wood), but when applied on difficult surfaces or in the cases when a particularly full and uniform effect is desired, we recommend the preliminary application of the High Coverage Waterbased Undercoat (NAT6910) or the Waterbased Antirust Undercoat (NAT6915XXXX). In the 00 gloss version it is perfect for wall use.
BORMA COLOR SYSTEM
The product is available in the tinting system.
Compatible pastes:
COWN / COWT series of water-based pigments.
• EN 71-3 Certification- Safe for children's toys.
| Code NAT690250-XX | 6 x 750ml |
| Code NAT690350-XX | 2 x 2,5Lt. |
| Code NAT690450-XX | 2 x 5Lt. |
| Code NAT690550-XX | 1 x 20Lt. |
LOGIN
Clean the surface to be treated from grease, silicone, old paints or traces of dirt. If necessary, sand or brush to remove loose pieces. If necessary, degrease with soap and water or alcohol.
Ready to use product. Dilute, if necessary, with 10-20% of water.
Application by brush or short pile roller.
It is possible to apply by spray after appropriate dilution (10-20% preferably demineralized water)
Leave to dry for 6 hours.
Sand lightly with 180-220 grit sandpaper.
Apply a second coat.
Complete drying in 24 hours.
LEGENDA
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-3 norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.
The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.
HACCP
Compliance with HACCP, an acronym for Hazard Analysis and Critical Control Points, means adhering to a food safety management system that aims to identify, evaluate and control hazards that can compromise the wholesomeness of food. In practice, it involves adopting preventive measures to ensure that food is safe for consumption.