High Coverage Water-based Enamel is a ready-to-use, ecological and odor-free product, easy to apply, suitable for any type of substrate, both indoors and outdoors.
Of high density, it is recommended for the finishing or maintenance of wood, iron, masonry surfaces and so on.
It does not need a special basecoat, but you can consider the use of High coverage waterbased undercoat (code NAT6910) or Anti rust undercoat (code 6915).
|NAT6900XXX-90||6 x 125ml||NAT6900XXX-30||6 x 125ml|
|NAT6901XXX-90||6 x 375ml||NAT6901XXX-30||6 x 375ml|
|NAT6902XXX-90||6 x 750ml||NAT6902XXX-30||6 x 750ml|
|NAT6903XXX-90||2 x 2,5Lt||NAT6903XXX-30||2 x 2,5Lt|
|NAT6904XXX-90||2 x 5Lt||NAT6904XXX-30||2 x 5Lt|
Remove residues of greases, powders and old varnishes, especially if they are inconsistent.
Mix well before use.
Ready to use, does not need dilution; application by brush or roller is recommended. In case of spray application it is possible to dilute with 10% of water, possibly demineralized. On external surfaces, apply at least two coats spaced apart for a minimum of 4 hours.
It is recommended to sand before the second coat to grant maximum adhesion and durability.
Total drying 12-24 hrs