1-2K WATERBASED BASECOAT FOR PARQUET

Home / INTERIORS - FLOORING - Pretreatment - Naturaqua Line Pretreatment

1-2K WATERBASED BASECOAT FOR PARQUET

code

NAT4140

SDS code: 4141

Description

Transparent waterborne basecoat for the treatment of any kind of wooden floor. Special for the preliminary treatment before Naturaqua Parkettlack. For interior use. Ready to use a single component, it can be catalyzed with Borma 4100-2K, catalyst for waterbased lacquers, in ratio 10:1. Excellent transparency and elasticity, thanks to its consistency it is easy to apply by brush as well as handroller. The water base grants low VOC content, in respect of users and environment.

Packaging

Code NAT4140 - 6 x 1Lt
Code NAT4141 - 2 x 5Lt
Code NAT4142 - 1 x 10Lt
Code NAT4143 - 1 x 20Lt

Technical Sheet

Safety Data Sheet

Application sheet

Info

Method of Usage

Sand the surface with 120 grain abrasive paper. Clean the surface from grease, oil, dust or old varnish layer.

To use the product catalyzed add Borma catalyst 4100-2K , in relationship 10:1 (varnish:catalyst). Adding water 5-10% and mixing. Wait 10 minutes.

Apply the product by brush or paint (80-100 ml/mq).

After 8-10 hours sand by 240 grain abrasive paper and than apply the finish.

CATALOGUES

LEGENDA

CERTIFICATIONS AND CONFORMITY
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.

Borma Wachs products are tested and approved by IBR, Intitut für Baubiologie Rosenheim. The performed analysis certify that our products are complying in terms of VOC content, biocides, heavy metals and radioactivity, guaranteeing full eco-compatibility with Green Building principles.

This product's safety is guaranteed more than just by EN 71-III certificate. Its safety for children is supported by DIN 53160/1-2 and DIN 68861/1 (Resistance to saliva and sweat; Resistance to cold liquids ) certificates as well. The product does not release harmful substances even when in contact with common alimentary liquids or mucuous membrane.

The product acts as fire retardant

CERTIFICATIONS AND COMPLIANCE
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.

The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.

CERTIFICATIONS AND COMPLIANCE
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.

CERTIFICATIONS AND COMPLIANCE
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.