WATERBASED LACQUER FOR FURNITURE
NAT4130
Eco friendly waterborne lacquer for the protection of wooden surfaces. 0 gloss total natural effect waxy waterborne finish. Applied keep wood of untreated surfaces without color change. Grants an excellent natural effect, with look and touch comparable to bare wood. Suitable for tops, doors and furniture in general, it doesn’t change the colour of wood. It can be activated with Catalyst 4100-2K, with the ratio varnish : catalyst = 10 : 1. It respects environment and the worker's health.
• IBR Certification for green building issued by the Rosenheim institute
• EN71.III Certification Safe for children's toys
• French VOC Class A+ compliance for emissions of volatile organic compounds in indoor environments
• Tested for performance according to the guidelines of the EN 13442:2013 Regulation (Resistance of floors to stains).
NAT4130 1 Lt 06 pcs.
NAT4131.5 5 Lt 02 pcs.
NAT4132 10 Lt
NAT4133 20 Lt
CATALYST NAT4100-2K
Code Desc. Pack.
NAT4099-2K 100 ml 12 pcs.
NAT4100-2K 250 ml 12 pcs.
NAT4100-2K 500 ml 12 pcs.
NAT4105-2K 1 Lt 06 pcs.
NAT4103-2K 2,5 Lt 02 pcs.
NAT4104-2K 5 Lt 02 pcs.
LOGIN
Apply on a smooth and clean surface, free of greases, oils, waxes, silicones and old varnishes.
If you want to use as bicomponent mix varnish and Catalyst 4100-2K in ratio 10 : 1, stir very well then add 5-10% of water (possibly demineralized), and stir again.
Apply by spray (preferentially) or by paintbrush.
Wait 6-12 hours and sand with abrasive paper grit 320 or abrasive pad, aspirate with care all the dust and clean with an antistatic cloth. Then apply a second coat of Invisible Touch without intermediate sanding.
