Eco friendly waterborne lacquer for the protection of wooden surfaces. 0 gloss total natural effect waxy waterborne finish. Applied keep wood of untreated surfaces without color change. Grants an excellent natural effect, with look and touch comparable to bare wood. Suitable for tops, doors and furniture in general, it doesn’t change the colour of wood. It can be activated with Catalyst 4100-2K, with the ratio varnish : catalyst = 10 : 1. It respects environment and the worker's health.
Apply on a smooth and clean surface, free of greases, oils, waxes, silicones and old varnishes.
If you wanna use as bicomponent mix varnish and Catalyst 4100-2K in ratio 10 : 1, stir very well then add 5-10% of water (possibly demineralized), and stir again.
Apply by spray (preferentially) or by paintbrush.
Wait 6-12 hours and sand with abrasive paper grit 320 or abrasive pad, aspirate with care all the dust and clean with an antistatic cloth. Then apply a second coat of Invisible Touch without intermediate sanding.