Waterbased transparent basecoat varnish for the treatment of any kind of wood for interiors. Special for the preliminary treatment of furniture before the finishing with Mobilack. Yeld: 8-12 m2/Lt. Temperature: + 5°C / + 30°C. Usage: Interior. Ready to use as single-component, can be catalyzed adding Borma catalyst 4100-2K for waterborne lacquers, ratio 10:1. Great transparency and elasticity, thanks to its texture it’s easy to apply by brush even on vertical surfaces. The waterbased formulation grants limited VOC release, respecting people and environment. Suitable for furniture, doors, skirtings, wooden walls.
Code NAT4126 - 6 x 1Lt
Code NAT4127 - 2 x 5Lt
Code NAT4128 - 1 x 10Lt
Code NAT4129 - 1 x 20Lt
Stir well before use.
Ready for use. Apply by spray or by brush. In case of need diluited 10-20%with water.
After a first coat for an excellent finishing it is advisable to apply a second coat. Before sand the surface. In case of maintenance of already coated finiture, remove the old coating film by sanding with 150 grain abrasive paper, then refine with 280 grain abrasive paper. To clean the surface and make it suitable for the application of the base coat gel.
The surface must be throuroghly cleaned, dry and free from oila and greasy substances.