TWO COMPONENT HIGH PERFORMANCE LACQUER
NAT41002K-XX
Waterbased polyurethane lacquer for the parquet floor treatment. o be activated with its specific catalyst. It respects the workers’ health, being waterbased and practically VOC free. 2k-Parketlack develops excellent protection levels against wear and abrasion, for traditional wooden floors, pre-sanded or to be restored. High performances and resistance with the convenience of a waterbased technology. To be used exclusively in combination with the specific catalyst, in a 10: 1 ratio.
Sheen (Gloss):
- 0/5 absolute opaque
- 10/20 deep matte
- 30/40 opaque
- 50/60 semilucid
- 80/90 full glossy
Code NAT41002K-XX - 6 x 1Lt
Code NAT41012K-XX - 2 x 2,5Lt
Code NAT41022K-XX - 2 x 5Lt
Code NAT41032K-XX - 1 x 10Lt
Code NAT41042K-XX - 1 x 20Lt
Catalyst 4100-2K
Code NAT4099-2K - 12 x 100ml
Code NAT4100-2K - 12 x 250ml
Code NAT4101-2K - 12 x 500ml
Code NAT4103-2K - 2 x 2,5Lt
Catalyst for Glossy 80-90 Gloss
Code NAT4107-2K-90 - 12 x 100ml
Code NAT4111-2K-90 - 12 x 250ml
Code NAT4108-2K-90 - 12 x 500ml
Code NAT4109-2K-90 - 2 x 1Lt
LOGIN
Apply on a smooth and clean surface, free from oils, greases, waxes, silicones and old varnishes, properly sanded.
Mix varnish and Catalyst in ratio 10 : 1, stir very well then add 20% of water (possibly demineralized), and stir again.
After 10 minutes apply the product.
Wait 4-6 hours and sand with abrasive paper grit 220, aspirate with care all the dust and clean with an antistatic cloth. Then apply a second coat.
LEGENDA
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.
The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.