NATURAQUA 1-2K WOOD SEALER

NATURAL EFFECT

code

SDS code: 4090

Description

Clear, acrylic insulator for interior and exterior use. It creates an imperceptible film for a “raw wood” effect.

Application fields:

as preliminary sealer in order to guarantee to waterborne finishes good adhesion on exotic oiled wooden surfaces such as teak, iroko and similar
as superficial fixative for natural effect finishes.

Catalyse the product with Borma 4100-2K at 10% to improve its surface strength.

Packaging

Method of Usage

Any pre-treatment must be removed. Apply on a dry, clean and dust free surface.

Apply by brush or roll, the product is ready to use.

Once ready apply one or two coats, with a minimum lack of time of 4/6hrs depending on the support and on the applied quantity.

Total drying will be obtained after 24h. If necessary, lightly sand the surface before the second coat.