Clear, acrylic insulator for interior and exterior use. It creates an imperceptible film for a “raw wood” effect.
Catalyse the product with Borma 4100-2K at 10% to improve its surface strength.
|Code NAT4090||6 x 750ml|
|Code NAT4091||2 x 5Lt|
|Code NAT4090.10||1 x 10Lt|
|Code NAT4090.20||1 x 20Lt|
Any pre-treatment must be removed. Apply on a dry, clean and dust free surface.
Apply by brush or roll, the product is ready to use.
Once ready apply one or two coats, with a minimum lack of time of 4/6hrs depending on the support and on the applied quantity.
Total drying will be obtained after 24h. If necessary, lightly sand the surface before the second coat.