VARNISH FOR BOATS
NAT3925XX
Self- sealer waterborne paint, ready for use and especially formulated for the nautical sector, with high elasticity and filling capacity. Ecofriendly, with very low emissions, with UV filters and additives, it protects wood, giving deep penetration providing a perfect resistant film that resists water and adverse weather conditions, enhancing the appearance and its natural beauty.
For preliminary coloration of the surfaces, the application of Naturaqua Holz Lasur exterior woodstain, is suggested then proceed to finish with two coats of Naturaqua Flatting Extra Marine. To implement its duration over time, Naturaqua Flatting Extra Marine can be directly colored with Water-Based Pigments.
| Glossy | Matt | |||
| Code NAT3925 | 6 x 375ml | Code NAT3925-30 | 6 x 375ml | |
| Code NAT3926 | 6 x 750ml | Code NAT3926-30 | 6 x 750ml | |
| Code NAT3927 | 2 x 2,5Lt | Code NAT3927-30 | 2 x 2,5Lt | |
| Code NAT3928 | 1 x 10Lt | Code NAT3928-30 | 1 x 10Lt | |
| Code NAT3929 | 1 x 20Lt | Code NAT3929-30 | 1 x 20Lt |
LOGIN
Dilute 10-15% with water.
In case of raw supports, take care that the timber is well-aged, clean and dry proceeding then to apply a first coat of very diluted product (20-40%).
In case of restoring of old supports, first lightly sand the surface, in order to clean and uniform it; than apply the first coat.
Apply then a second coat after 24 hours, to allow correct drying to occur.
