WATERBORNE STAIN WITH ANTI-WOOD BEETLE
NAT3634XX
Protective waterborne stain with anti-woodworm developed mainly for the treatment of wooden houses, suitable for any pre-treatment of outdoor wooden items. NF01A This waterborne protective primer prevents from attacks by molds, fungi, insects, moths and mites during the construction period when the house is left without finishing.
After normal wear due to atmospheric agents over a medium-long period of time, NF01A is exhausted, but the wood has remained protected while maintaining its original color and is sufficiently saturated not to require an additional primer. With this product, the wood can dry properly and reach its final volume without being consumed by atmospheric agents.
Broad spectrum protection against blue stain fungi according to European standard EN 152 and insect protection according to EN 46, EN118, EN84 and EN73.
Suitable as a preliminary treatment for rough or sanded wooden houses, garden sheds, bridges, outdoor wooden structures, but also for windows, external doors, cladding, fences, etc.
Easy application
Code NAT3634XX.750 - 6 x 750ml
Code NAT3634XX.2,5 - 2 x 2,5Lt
Code NAT3634XX.5 - 2 x 5Lt
Code NAT3634XX.20 - 1 x 20Lt
LOGIN
The product should be applied to new and raw wood.
If the substrate has been previously treated, clean and sand back to the rough, as much as possible.
All methods of application are suitable, but a brush is preferred. The product has excellent penetration and protects the wood in depth, provided it is applied evenly over the entire surface.
A single coat of product is sufficient.
Leave the product to dry for 6-8 hours, possibly during the day, to avoid humidity at night.
After 24 hours, the support can possibly be overpainted with impregnating agents or water-based finishes.
LEGENDA
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.
The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.