Wood Care Professional Products - Welcome to Borma Wachs
search

WATERBORNE EXTERIOR WOODSTAIN

code

NAT3610XX

SDS code: 3611
Description

Water-based minimal build woodstain, prepared with resins and oils. The product penetrates deep into the wood enhancing the grain and providing a bright finish. The high-quality substances and UV filters in the product prevent the formation of dye rot and attacks by insects such as woodworm and certain beetles, while guarantee-ing optimal resistance to weather conditions. For interior and exterior use, light resistant colours, its natural density facilitates brush application.

Packaging

Code NAT3610XX - 6 x 375ml
Code NAT3611XX - 6 x 750ml
Code NAT3612XX - 2 x 2,5Lt
Code NAT3613XX - 1 x 10Lt
Code NAT3614XX - 1 x 20Lt

img_certICON_LINE_ESTERNIICON_ADD_ACQUAICON_CERT_EN713ICON_CERT_UV_FILTERS
Method of Usage

1

Ready to use. Apply by brush in clean and dry surface.


1

On external support  at least  two coats. The second one after 4-6 hours from the first. The waiting-time depends on the layer applied and from the support.


1

Sand the support before the application of the second coats.


1

For particularly cured finished, after applications, it is recommended to use a cloth. Total dry time: 24 hours.

CATALOGUES
EXTERIORS
Skyline di Venezia / Venice Skyline
×

LEGENDA

loghettobps

ICON_CERT_EN713
CERTIFICATIONS AND CONFORMITY
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
ICON_CERT_IBR
Borma Wachs products are tested and approved by IBR, Intitut für Baubiologie Rosenheim. The performed analysis certify that our products are complying in terms of VOC content, biocides, heavy metals and radioactivity, guaranteeing full eco-compatibility with Green Building principles.
ICON_CERT_DIN
This product's safety is guaranteed more than just by EN 71-III certificate. Its safety for children is supported by DIN 53160/1-2 and DIN 68861/1 (Resistance to saliva and sweat; Resistance to cold liquids ) certificates as well. The product does not release harmful substances even when in contact with common alimentary liquids or mucuous membrane.
CERT_BFLS1
The product acts as fire retardant
CERT_DGALN_A
CERTIFICATIONS AND COMPLIANCE
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.

The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EC1
CERTIFICATIONS AND COMPLIANCE
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO
CERTIFICATIONS AND COMPLIANCE
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.