DECORATIVE EXTERIOR FINISH
NAT3350XX
Special non-peeling waterbased finish for wood, made with high quality waxes and resins. Ideal for the protection and ennoblement of wood in exteriors. Yeld: 8 – 12 m²/Lt Temperature: + 5°C / + 30°C Usage:Interior/Exterior With UV filters. The high-quality substances and UV filters in the product prevent the formation of dye rot and attacks by insects such as woodworm and certain beetles, while guaranteeing optimal resistance to weather conditions. Easy to apply also on vertical surfaces, thanks to the special consistency. It Does not contain Lindane and PCP
• EN71.III Certification Safe for children's toys
• IBR certification - Rosenheim Institute for Green Building
• French VOC A+ class for indoor Volatile organic compounds emissions Conformity
Code NAT3350 - 6 x 375ml Matt 30
Code NAT3351 - 6 x 750ml
Code NAT3352 - 2 x 2,5Lt
Code NAT3351.10 - 1 x 10Lt
Code NAT3351.20 - 1 x 20Lt
Code NAT3350-60 - 6 x 375ml Satin 60
Code NAT3351-60 - 6 x 750ml
Code NAT3352-60 - 2 x 2,5Lt
Code NAT3351.10-60 - 1 x 10Lt
Code NAT3351.20-60 - 1 x 20Lt
LOGIN
Ready to use, it is recommended to apply it by brush (always the first coat), on clean and dry supports.
If necessary lightly sand the support before the application of the second coat.
On external support apply at least two coats, the second one after a minimum of 8 hours from the first.
For particularly cured finishes, after application by brush, it is recommended to use a cloth.
LEGENDA
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.
The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.