ENRICHED WITH OIL-WAX - INTERIOR AND EXTERIOR - SOLID COLOUR FULL COVERING FINISH
NAT3315XX-DEC
It's a high-solid, satin, water-based finish, suitable both for interiors and exteriors, in a special range of bright or pastel colours. It has excellent coverage power and high resistance against light. The product, ready to use, demonstrates excellent elasticity and is fast drying. With high-quality resins and waxes, UV filters and preservatives, it protects the wood from biological agents and adverse weather conditions. The product is easy to apply by brush and its special gel formulation avoids dripping.
3in1:
1. Impregnate
2. Protect
3. Decorate
Code NAT3315XX-DEC - 6 x 750ml
Code NAT3325XX-DEC - 2 x 2,5Lt
Code NAT3335XX-DEC - 2 x 5Lt
Code NAT3315.10XX-DEC - 1 x 10Lt
Code NAT3315.20XX-DEC - 1 x 20Lt
LOGIN
Ready to use, it is recommended to using a brush (always the first coat) on clean and dry supports.
On external support apply at least two coats, the second one after a minimum of 8 hours from the first. If necessary slightly sand the surface before the application of the second coat.
The complete drying is obtained after 24 hours.
For particularly cured finishes, after application by brush, it is recommended to use a cloth.
LEGENDA
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.
The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.