UNIVERSAL STAIN CONCENTRATE /INTERIORS AND EXTERIORS
NAT3000XX
A Special water based liquid stain of high strength and light resistance used to colour directly raw wood as well to Tint Basecoats or Topcoats of the NATURAQUA RANGE. Due to its particular formula the stain can be used for Interior as Exterior projects, keeping a good colour brightness till a max suggested dilution ratio 1-1. Ready for use can be diluted with water, alcohol, acetone and other polar solvents, once dry allows to be overcoated with any type of lacquer waterborne, thinner based or PU.
Code NAT3000XX - 12 x 250ml
Code NAT3000XX.1 - 12 x 1Lt.
Code NAT3000XX.5- 2 x 5Lt.
Code NAT3000XX.20 - 1 x 20Lt.
LOGIN
Dilute the product with water or apply it as is, depending on the needs.
Apply with a sponge or brush on untreated , clean and sand papered surfaces.
Leave to dry depending on the type of dilution used ; in the case of the product being diluted with water , drying time is between 12 and 24 hrs.
Sand lightly than finish with synthetic or shellac based varnishes.
