It's a ready to use binding resin for the individual preparation of wood filler. Combined together with wood dust, obtained from sanding, it gives as a result a spreadable paste. The binding resin doesn't change the original colour of the wood, therefore the paste is the same colour as the wood the powder was obtained from. The paste can be stained or overpainted both with solvent and water based products. In order to correct the color it's possible to add Holzfarbe Color Concentrate Multipurpose Dye. For dilution and cleaning of tools use water.
Code NAT0052 - 12 x 1Lt
Code NAT0053 - 2 x 5Lt
Code NAT0054 - 1 x 15Lt
Code NAT0055 - 1 x 20Lt
Mix 3 parts of resin with 1 part of wood powder then mix well until the paste is suitable for spreading.
Apply directly onto clean surfaces and make sure the filler fully penetrates into the cracks.
When the filler is completely dry (after 1 hour), sand and...
... proceed with painting as required.