EC0011XX
Suitable for the preparation of specific hand applied polish or to complement finishing operations on restoration work. It gives the surface a particular shiny effect, dry and velvet at touch; moreover it enlightens the wood grain, giving a nice aesthetic effect. The various types available are:
1) Naturally waxed: ABTN;
2) De-waxed: NE Black Garnet, AR Orange, RU Ruby Red, TR Transparent.
They allow to obtain, without the addition of chemical dyes, original and different chromatic shades.
Code 0011XX - 1Kg
Code 0011XX - 25Kg
LOGIN
Select the shellac for the required finish, dissolve in Solve, preferably 99°, at an initial ratio of 300 g./l.
Wait 24 hours, filter the solution and apply as a base coat on the interest support.
For the finish, it is advisable to reduce the concentration by adding 200 g. of Shellac 99 for every 100 g. of initial solution, which makes the product much easier to use This would give a much more workable product.
If the product is applied by pad, pour a few drops of Borma Bio-Polierol on the support when it is being treated which improves the application time. Any halos at the end can be removed with Borma Finishing Spirit.
LEGENDA
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.
The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.