QUICK FILLER - TRANSPARENT
D1070
Transparent wax filler. Ideal for the fixing of any previous colored touch-up. Available in three different shades to reproduce lacquers' oxydation tone.
| Code D1070 | 10 x 30gr | Transparent |
| Code 1070 KL | 20 x 15gr | Transparent |
| Code D1070 N | 10 x 30gr | Transparent Natural |
| Code D1070 KL | 20 x 15gr | Transparent Natural |
| Code D1070 ND | 10 x 30gr | Dark Transparent Natural |
| Code D1070 ND KL | 20 x 15gr | Dark Transparent Natural |
LOGIN
Using a sharp chisel, remove any splinters or damaged wood from the area to be repaired in order to form a sound base for the application of the wax.
Pre-stain the damaged area and edges using a suitable shade of Touch-up dye Pen or Colour Edging Pen colour or the matt or semi-matt touch-up pen, and fill with the wax by pressing it into the damaged area, then level using a spatula. More than one shade of wax can be applied to obtain the desired colour match.
When the flaws are completely covered, clean off any excess wax with an abrasive pad, not too coarse.
In order to improve the shade touch up with the Colour Edging Pen, Touch-up dye Pen, Graining Pen, Touch-up dye or Colour touch-up. Fix with a fine coat of Holzspray varnish.
LEGENDA
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.
The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.