Wood Care Professional Products - Welcome to Borma Wachs
search

GOLD LACK PRO

code

CDO6980XXX-90

SDS code: CDO6980OR
Description

Shiny special finish, that re-proposes the traditional colors of gilding. Finishing varnish of excellent quality and good decorative effect for the reproduction of gold effect, it's easy to apply and gives excellent resulst. It can be used in professional finishing cycles and, where necessary, it can be overlacquered with transparent finishes to increase the duration and chemical-physical resistance.

Available in the following colors:
Brilliant Ducat Gold 28 (ODB)
Pale Gold 24 (OP)
Rich Gold 11 (OR)
Rich Gold Pale 23 (ORP)
Chrome Gold 11 / F (CR)

Packaging

Code CDO6980XX      - 6 x 125ml
Code CDO6981XX      - 6 x 375ml
Code CDO6982XX      - 6 x 750ml
Code CDO6983XX      - 2 x 2,5Lt
Code CDO6984XX      - 2 x 5Lt
Code CDO6984.20XX - 1 x 20Lt

img_certICON_LINE_DORATURA
Method of Usage

1

Apply on a smooth and clean surface, free from oils, greases, waxes, silicones and old varnishes, polished and treated with a special primer.


1

Mix well before and during use; apply by brush, for details, or by spray, for large surfaces.

CATALOGUES
GILDING
Skyline di Venezia / Venice Skyline
×

LEGENDA

loghettobps

ICON_CERT_EN713
CERTIFICATIONS AND CONFORMITY
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
ICON_CERT_IBR
Borma Wachs products are tested and approved by IBR, Intitut für Baubiologie Rosenheim. The performed analysis certify that our products are complying in terms of VOC content, biocides, heavy metals and radioactivity, guaranteeing full eco-compatibility with Green Building principles.
ICON_CERT_DIN
This product's safety is guaranteed more than just by EN 71-III certificate. Its safety for children is supported by DIN 53160/1-2 and DIN 68861/1 (Resistance to saliva and sweat; Resistance to cold liquids ) certificates as well. The product does not release harmful substances even when in contact with common alimentary liquids or mucuous membrane.
CERT_BFLS1
The product acts as fire retardant
CERT_DGALN_A
CERTIFICATIONS AND COMPLIANCE
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.

The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EC1
CERTIFICATIONS AND COMPLIANCE
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO
CERTIFICATIONS AND COMPLIANCE
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.