SHINE-DECOR GOLD LACK/SHINE-DECOR COPPER LACK

Home / GILDING - Gilding

SHINE-DECOR GOLD LACK/SHINE-DECOR COPPER LACK

code

CDO6960XXX-90

SDS code: CDO6960OR

Description

Gold and Copper Lacquers for Interiors
Metallic paints with a particularly bright effect suitable for decorative purposes and suitable for brush application by novices and craftsmen alike.
It is ideal for the decoration of fine objects, frames, furniture and in general for surfaces in wood, plaster and metal.
Overcoating is not recommended as it may compromise the final effect, although a slight fixing overcoat is possible with care.

Gold Lack is available in the following colours:
Rich, Pale, Rich Pale, Ducat, Gold Chrome and Silver Chrome.
Shine-Decor Copper Lack is in Copper colour.

Packaging

Code CDO6960XXX-90 - 6 x 125ml
Code CDO6961XXX-90 - 6 x 375ml
Code CDO6962XXX-90 - 6 x 750ml
Code CDO6963XXX-90 - 2 x 2,5Lt
Code CDO6964XXX-90 - 2 x 5Lt
Code CDO6964.20XXX90 - 1 x 20Lt

11
GOLD

23
RICH PALE GOLD

28
BRILLIANT DUCAT GOLD

Method of Usage

Apply on a smooth and clean surface, free from oils, greases, waxes, silicones and old varnishes, polished and treated with a special primer.

Mix well before and during use; apply by brush, for details, or by spray, for large surfaces.

CATALOGUES

LEGENDA

CERTIFICATIONS AND CONFORMITY
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.

Borma Wachs products are tested and approved by IBR, Intitut für Baubiologie Rosenheim. The performed analysis certify that our products are complying in terms of VOC content, biocides, heavy metals and radioactivity, guaranteeing full eco-compatibility with Green Building principles.

This product's safety is guaranteed more than just by EN 71-III certificate. Its safety for children is supported by DIN 53160/1-2 and DIN 68861/1 (Resistance to saliva and sweat; Resistance to cold liquids ) certificates as well. The product does not release harmful substances even when in contact with common alimentary liquids or mucuous membrane.

The product acts as fire retardant

CERTIFICATIONS AND COMPLIANCE
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.

The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.

CERTIFICATIONS AND COMPLIANCE
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.

CERTIFICATIONS AND COMPLIANCE
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.