headertop
PRODUCTS
Home / GILDING - Preparation - Preparation

SOLVENT BASED GOLDSIZE

code CDO6830
whatsapp

img_certICON_LINE_DORATURA
Description

It's a special glue for gilding, developed for reduce working time during leafing processes. Very good with genuine gold and silver leaves, it is suggested also for imitation metal leafs. For indoor and outdoor use.

Packaging

Code CDO6830 - 6 x 250ml
Code CDO6831 - 6 x 500ml
Code CDO6832 - 6 x 1Lt
Code CDO6833 - 2 x 5Lt
Code CDO6834 - 1 x 10Lt
Code CDO6835 - 1 x 20Lt

Method of Usage

1

At 20°C a correct dilution is with 50% of Universal Nitro Thinner DNU, that will provide a very quick drying and also the correct spreadability.


1

Usually it is applied by spray, indifferently with air-mix or air-less system. On a clean and dust-free surface, better if insulated with Zapon Intermediate Gilding Insulator, apply an even and very light coat of Solvent-based Goldsize. Avoid any local excess, that will compromise the drying.


1

After 15-20’ (at 20°C) the surface is sticky and ready for leafing. After 60’ the surface can be pressed with a cotton buffer or paper buffer to enhance adhesion of leaf.


1

After 4 hours the goldsize is exhausted and no more sticky, then it can be protected with another coat of Zapon Intermediate Gilding Insulator.

catalogoprodimg