Zapon 2k Acrylic Basecoat + Catalyst

Home / GILDING - Preparation - Preparation

ZAPON 2K ACRYLIC BASECOAT + CATALYST

code

CDO392FANESEGG

SDS code: CDO500FAT

Description

Acrylic basecoat, characterised by very good covering and superficial hardness. It is perfect as a primer for all kind of wooden surfaces. When colored, It is particularly suitable for the manufacturing of single color furniture. It must be catalyzed with HA.059 at 15% rate if transparent and at 20% rate if colored (percentages by weight).

Packaging

Code CDO392FAN.1 - 6 x 1Lt Black
Code CDO392FAN.5 - 2 x 5Lt
Code CDO392FAN.25 - 1 x 25Lt
Code CDO552FAB.1 - 6 x 1Lt White
Code CDO552FAB.5 - 2 x 5Lt
Code CDO552FAB.25 - 1 x 25Lt
Code CDO500FAT.1 - 6 x 1Lt Transparent
Code CDO500FAT.5 - 2 x 5Lt
Code CDO500FAT.25 - 1 x 25Lt

Catalyst
Code CDO059HA.200 - 6 x 200ml
Code CDO059HA.1 - 6 x 1Lt
Code CDO059HA.5 - 2 x 5Lt

Safety Data Sheet

Application sheet

Info

Method of Usage

Prepare the paint for the application. In a clean container, pour 100 parts of 552FAB, 20 parts of HA.059 catalyst and 20 solvent parts (parts by weight). Mix well before use.

On a previously cleaned and degreased surface, apply the catalyzed pain by spray, taking care to uniform the product on the surface.

Apply from 1 to 2 coats, from 80-120 gr / m2, delayed by 30 'and a light sanding with 280 grit paper.

CATALOGUES

LEGENDA

CERTIFICATIONS AND CONFORMITY
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.

Borma Wachs products are tested and approved by IBR, Intitut für Baubiologie Rosenheim. The performed analysis certify that our products are complying in terms of VOC content, biocides, heavy metals and radioactivity, guaranteeing full eco-compatibility with Green Building principles.

This product's safety is guaranteed more than just by EN 71-III certificate. Its safety for children is supported by DIN 53160/1-2 and DIN 68861/1 (Resistance to saliva and sweat; Resistance to cold liquids ) certificates as well. The product does not release harmful substances even when in contact with common alimentary liquids or mucuous membrane.

The product acts as fire retardant

CERTIFICATIONS AND COMPLIANCE
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.

The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.

CERTIFICATIONS AND COMPLIANCE
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.

CERTIFICATIONS AND COMPLIANCE
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.