ZAPON 2K POLYURETHANE BASECOAT + Catalyst

Home / GILDING - Preparation - Preparation

ZAPON 2K POLYURETHANE BASECOAT + CATALYST

code

CDO010FPN.1

SDS code: CDO010FPN

Description

Polyurethane basecoat, special for gilding.

Packaging

Code CDO010XXX.1 - 6 x 1Lt
Code CDO010XXX.5 - 2 x 5Lt
Code CDO010XXX.25 - 1 x 25Lt
FPN = Black, FPB = White, FPT = Transparent
Catalyst
Code CDOXXXHA.0,5 - 6 x 0,5Lt
Code CDOXXXHA.2,5 - 2 x 2,5Lt
Code CDOXXXHA.12,5 - 1 x 12,5Lt
003 = for Transparent, 007 = for Colours

Safety Data Sheet

Method of Usage

Characterised by very good covering and superficial hardness, allows easily to obtain plain smooth surface just to emphasize subsequent metal effects. It must be catalysed with HA.003 if transparent (50% by weight) and with HA.007 if colored (40% by weight).

In a clean container, pour 100 parts of 010FPT, 50 parts of HA.003 catalyst and 20 parts of solvent (parts by weight). Mix well before use.

On a previously cleaned and degreased surface, apply the catalyzed pain by spray, taking care to uniform the product on the surface.

Apply at least 2 coats of product, from 120 gr / m2, delayed by 60-90 '. Then wait for the correct drying times and then sand with 280 grit paper.

CATALOGUES

LEGENDA

CERTIFICATIONS AND CONFORMITY
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.

Borma Wachs products are tested and approved by IBR, Intitut für Baubiologie Rosenheim. The performed analysis certify that our products are complying in terms of VOC content, biocides, heavy metals and radioactivity, guaranteeing full eco-compatibility with Green Building principles.

This product's safety is guaranteed more than just by EN 71-III certificate. Its safety for children is supported by DIN 53160/1-2 and DIN 68861/1 (Resistance to saliva and sweat; Resistance to cold liquids ) certificates as well. The product does not release harmful substances even when in contact with common alimentary liquids or mucuous membrane.

The product acts as fire retardant

CERTIFICATIONS AND COMPLIANCE
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.

The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.

CERTIFICATIONS AND COMPLIANCE
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.

CERTIFICATIONS AND COMPLIANCE
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.