SPECIAL THINNER FOR SHELLAC
AL100
Special solvent for Shellac with high solving power. Fast drying, not graying. Used in wood polishing, in particular in antique furniture restoration, and it is specific for shellac dilution. It is a component of paintings cleaning mixtures (mista). It is mixable with water, acetone, ether, ecc. The 100° version, thanks to its complete neutral tone, is ideal to obtain completely transparent finishes.
Code AL100.1 - 12 x 1Lt
Code AL100.5 - 2 x 5Lt
Code AL100.25 - 1 x 25Lt
LOGIN
Once it has been found the right shellac to obtain the desired finishing, dissolve it in Shellac 100, with an initial ratio of 300 gr. per Lt.
After 24 hrs, filter the obtained solution and proceed with the application as basecoat on the interested support.
For the finsihing process it is advisable to reduce the concentration of shellac, adding 200 gr of Shellac 100 every 100 gr of original solution. The obtained product should be more easily applicable.
In case of application by buffer, spread on the supports some drops of Bio-Polieröl, to improve the lubrication and the fluency during application. To remove halos use Borma Finishing Spirit.
LEGENDA
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.
The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.