Special solvent for Shellac with high solving power. Fast drying, not graying. Used in wood polishing, in particular in antique furniture restoration, and it is specific for shellac dilution. It is a component of paintings cleaning mixtures (mista). It is mixable with water, acetone, ether, ecc. The 100° version, thanks to its complete neutral tone, is ideal to obtain completely transparent finishes.
Code AL100.1 - 12 x 1Lt
Code AL100.5 - 2 x 5Lt
Code AL100.25 - 1 x 25Lt
Once it has been found the right shellac to obtain the desired finishing, dissolve it in Shellac 100, with an initial ratio of 300 gr. per Lt.
After 24 hrs, filter the obtained solution and proceed with the application as basecoat on the interested support.
For the finsihing process it is advisable to reduce the concentration of shellac, adding 200 gr of Shellac 100 every 100 gr of original solution. The obtained product should be more easily applicable.
In case of application by buffer, spread on the supports some drops of Bio-Polieröl, to improve the lubrication and the fluency during application. To remove halos use Borma Finishing Spirit.