High temperature enamel is an alkyd-silicone protective product, special for surfaces and structures in metal or cement subjected to intense heat.
Withstands temperatures up to 800 ° C (not continuous). With a semi-glossy appearance, it is available in black and aluminum.
Easy application by roller, spray or brush, also suitable for touch-ups on previously painted surfaces.
Ready to use, requires dilution only in the case of spray applications.
Code Semi-Gloss Desc. Pack. |
6950XX 125 ml 6 pcs. |
6952XX 750 ml 6 pcs. |
6953XX 2,5 lt 6 pcs. |
6950XX.20 20 lt |
Code Matt Desc. Pack. |
6950XX-30 125 ml 6 pcs. |
6952XX-30 750 ml 6 pcs. |
6953XX-30 2,5 lt 6 pcs. |
6950XX.20-30 20 lt |
Clean the surface to be treated from grease, silicones, old paints or traces of dirt and rust; brush, sandblast or sand, finally remove dust.
Spread the product evenly with a brush, roller or spray.
Leave to dry for 1-2 hours.
Sanding not necessary within 24 hours from the first coat. In case, 180-220 grit.
Apply a second coat.
Subject to controlled heat (250 ° C) for 1 hour at least to facilitate the hardening process and obtain maximum resistance. Drying at room temperature in 24 hours.