UNIVERSAL
6915
Anti-rust Undercoat is a ready-to-use product, easy to apply, recommended for iron, indoors and outdoors.
High density, it is recommended as primer for iron surfaces, new or to be restored.
Ideal for furniture, gates, fixtures, iron surfaces in general.
| Cod. 6916XXXX | 6 x 375ml |
| Cod. 6917XXXX | 6 x 750ml |
| Cod. 6918XXXX | 2 x 2,5Lt |
| Cod. 6919XXXX | 2 x 5Lt |
| Cod. 6915.20XXXX | 20 Lt |
LOGIN
Remove residues of greases, powders and old varnishes, especially if they are inconsistent. Remove any rust that may be present as much as possible by sanding, brushing or washing with solvent.
Ready to use, does not need dilution; application by brush or roller is recommended. In case of spray application it is possible to dilute with 10% of DNU016 or Solvoil products.
On external surfaces, apply one or two coats waiting a minimum of 3-4 hours in between. It is advisable to sand lightly before the second coat to ensure maximum adhesion and durability.
Total drying 24 hrs. Continue with the application of the enamel.
LEGENDA
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.
The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.