ANTIRUST
6900XX
The High Coverage Enamel is a ready-to-use product, easy to apply, suitable for any type of Wood-Metal support, indoors and outdoors. Creates a decorative film, water repellent and resistant to atmospheric agents, with low yellowing. Thanks to the special formulation with light-resistant pigments, it does not fade.
Of high density, it is recommended for the finishing or maintenance of wood, iron, masonry surfaces and wherever an effect of high coverage and filling is desired.
It does not need a specific wooden base, but if you want a particularly full and uniform effect, we recommend the preliminary application of the High Coverage Basecoat.
On iron we recommend the preliminary application of the Antirust Enamel (code 6920) for a better seal and management of corrosion phenomena.
Ideal for furniture, beads, attics, beams, fixtures, fences, wooden houses, boats.
| GLOSSY | MATT | |||
| Cod. 6900XX-90 | 6 x 125ml | Cod. 6900XX-30 | 6 x 125ml | |
| Cod. 6901XX-90 | 6 x 375ml | Cod. 6901XX-30 | 6 x 375ml | |
| Cod. 6902XX-90 | 6 x 750ml | Cod. 6902XX-30 | 6 x 750ml | |
| Cod. 6903XX-90 | 2 x 2,5Lt | Cod. 6903XX-30 | 2 x 2,5Lt | |
| Cod. 6904XX-90 | 2 x 5Lt | Cod. 6904XX-30 | 2 x 5Lt |
LOGIN
Remove residues of greases, powders and old varnishes, especially if they are inconsistent.
Mix well before use.
Ready to use, does not need dilution; application by brush or roller is recommended. In case of spray application it's possible to dilute with 10% of DNU016 or Solvoil products.
On external surfaces, apply at least two coats waiting a minimum of 4-6 hours inbetween. It is advisable to sand before the second coat to ensure maximum adhesion and durability.
