SELF SEALING OIL
4951-XX.PRO
Blend of valuable vegetable oils, reinforced with high quality resins, for the finishing of untreated interior wooden surfaces.
It provides an excellent resistance to stains and wear, does not need specific basecoats and is supplied ready for use.
Natural satin effect.
It has a high solid, slower drying, ultra-flow formulation for application with rotating buffing machine.
Not designated flammable for ADR.
Recommendations for application:
The product can be applied by brush, roller, rag, spray or on industrial lines.
Always provide proper ventilation to the treated areas to allow the correct drying process of the oil.
Approx. yield: 12-26 m²/Lt.
• Certification for green building issued by the Rosenheim IBR institute.
• French VOC Class A+ Certification
• EN71.III Conformity: Safe for children's toys.
• Conformity to DIN 68861-1:2011 norm, resistance to cold liquids.
• Conformity to DIN 53160 norm, resistance to saliva and sweat.
Code 4951-XX.PRO - 6 x 1Lt
Code 4952-XX.PRO - 2 x 5Lt
Code 4953-XX.PRO - 1 x 10Lt
Code 4954-XX.PRO - 1 x 20Lt
show more
LOGIN
Sand the surface to obtain a smooth surface, clean and free from oils, grease, waxes, silicon and old varnishes.
Stir well before usage. The product can be applied both by hand (paintbrush, handroller, rag) and by buffing machine (white pad), that warms of the surface and therefore helps the deep impregnation of the background, leading to a special soft and natural effect. To obtain a regular drying apply even and not too thick layers.
After sufficient hardening sand with abrasive paper or net, 220-240 grain and dust off accurately before the application of a second coating.
Total drying time: 12-24 hours.
LEGENDA
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.
The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.