Based on natural oils and enriched with high quality resins and waxes, Hard Top Oil provides excellent protection with a pleasant natural effect. Suitable for tables and kitchen surfaces in general, as well as chopping boards and wooden utensils, it is certified for food contact according to EN 71.3, DIN53160 and DIN68861 standards. Also available in the waxy version with natural matt effect Hard Top Oil Natural 6020. Applicable by brush, rag, roller or spray. For a particularly cured effect it is advisable to remove the excess with a soft cloth. Allow to dry completely before using the treated object. The chopping boards and in general the articles of frequent use can be washed with water and neutral soap; they will be subject to maintenance proportional to the frequency of use. Indicative yield: 14-26m² / Lt
|Hard Top Oil||Hard Top Oil Natural 6020|
|Code 4916||6x750ml||Code 4916N||6x750ml|
|Code 4917||2 x 5Lt||Code 4917N||2 x 5Lt|
|Code 4916.10||1 x 10Lt||Code 4916.10N||1 x 10Lt|
|Code 4916.20||1 x 20Lt||Code4916.20N||1 x 20Lt
Before proceeding with the application of Hard Top Oil, it is advisable to mix the product well and clean the surface to be treated in order to remove dust and grease. If possible, then lightly sand.
Spread the product with a brush or rag. After 5-10 minutes, uniform the surface by removing the excess with a lint-free cloth. In low-porosity wood it is recommended to dilute with Solvoil 04.
Wait 6-8 hours to get the surface to dry in relation to the applied quantity and temperature. Sand with 180-220 abrasive paper and proceed with the application of the second coat.
Wait at least 24 hours before use.