OIL FOR FURNITURE
4902-XX
It's a mixture of natural precious oils, reinforced with resins, for the treatment and finishing of every rough wood surface.
Compliance EN71.III: safe for children’s toys
Compliance DIN 68861-1:2011: Resistance to cold liquids
Compliance DIN 53160: Resistance to saliva and perspiration.
Cod. 4902 - 6 x 1Lt
Cod. 4903 - 2 x 5Lt
Cod. 4902.10 - 1 x 10Lt
Cod. 4902.20 - 1 x 20Lt
Hardwax furniture oil (waxed version) :
Cod. 4907 - 6 x 1Lt
Cod. 4908 - 2 x 5Lt
Cod. 4914 - 1 x 10Lt
Cod. 4909 - 1 x 20Lt
LOGIN
Hard Forniture Oil gives wood an excellent resistance to scratches and to water. Very easy to apply, it is perfect for the ordinary and extraordinary maintenance of the surfaces treated with oil. Suitable for hard and soft woods, and especially for woods with high porosity. Suitable for painting doors, windows, baseboards and so on. Only for indoor use.
Shake vigorously before usage.
Apply Forniture Oil uniformly using a brush or a rag on a clean surface, free from dust and grease.
Wait from 6 to 8 hours for the surface to dry (depending on thickness and temperature), and then sand the surface with 220/240 grain, for increased softness. The sanding should be light but uniform.
Then proceed with the application of a second coat. To obtain a regular drying, apply taking care not to create too thick coverings. Complete drying after 12 h, maximum hardness after 24 h.
LEGENDA
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.
The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.