TWO COMPONENT HIGH PERFORMANCE LACQUER
4141-2K-XX
High solid two components polyurethane finish for wooden floorings. Easy to apply and with wide open time, it’s formulated to grant great workability and spreadability, even with high temperatures, offering the best protection level.
Catalysis 1:1. The product has to be diluted with DPU011 at 10-20%. To be used with 2k PU Parkettlack basecoat, even in one single coat. Approx yield: 10-14m²/Lt.
Code Desc. Desc. Pack.
4140-2K-XX 2K Parketlack Pu Kit 0,5 Lt. + 0,5 Lt A+B 1 Lt 06 pcs.
4141-2K-XX 2K Parketlack Pu Kit 1 Lt. + 1 Lt A+B 2 Lt. 06 pcs.
4142-2K-XX 2K Parketlack Pu Kit 2,5 Lt. + 2 ,5 Lt A+B 5 Lt.
Catalyst Parkettlack 2k-PU
Code Desc. Pack.
4115-K 500 ml 06 pcs.
4107-K 1 Lt. 06 pcs.
4107.2,5-K 2,5 Lt. 02 pcs.
4108-K 5 Lt. 02 pcs.
4110-K 20 Lt.
Parkettlack 2K-PU
Code Desc. Pack.
4115-2K-XX 500 ml 06 pcs.
4100-2K-XX 1 Lt. 06 pcs.
4101-2K-XX 2,5 Lt. 02 pcs.
4102-2K-XX 5 Lt. 02 pcs.
4104-2K-XX 20 Lt.
LOGIN
Add the catalyst to the paint and mix very well; if necessary, dilute with a maximum of 20% of Universal Diluent for PU (DPU).
On a smooth and clean surface, free of oil, grease, wax, silicone and old lacquer residues, apply Borma Parkettlack 2K, with a brush or roller, for a minimum of two coats, each with a capacity of 80-100g / m2, depending on the desired final result.
Once the first coat has dried, after 12-24 hours, sand carefully with 220 sandpaper, remove all the dust and any residues with an anti-static cloth.
Then proceed by applying the second layer.
Allow to dry for at least 48 hours before allowing light traffic.
To increase the coverage of the coating, (closed pore effect), it is recommended to apply the Borma Parkettlack 2k Fund (Code 4250-2K).
Related products
