Wood Care Professional Products - Welcome to Borma Wachs
search

INTERIOR OIL REFRESHER

SPECIAL FOR OIL FINISHES

code

3976

SDS code: 3976
Description

For the extraordinary maintenance of indoor wood, the Interior oil refresher is perfect for the care and restoration of every surface previously treated with Borma oils. Easy to apply, it nourishes the wood and renews the existing protective layer. It gives a pleasantly satin appearance and enhances the natural beauty of wood. 

Apply with a brush or rag without excess. For normal maintenance, just one coat is sufficient. Allow to dry completely before re-using the surface.

Packaging

Code 3976      - 12 x 250ml
Code 3977      - 12 x 500ml
Code 3978      - 12 x 1Lt
Code 3978.05 - 2 x 5Lt

img_certICON_LINE_INTERNIICON_CERT_EN713ICON_CERT_IBR
Method of Usage

1

On a surface previously cleaned and degreased...


1

...apply the product evenly and allow to dry. If the support hasn’t got any un-homogeneity or crack, a single step to get a correct veil of product may be already sufficient to restore the surface.


1

Where necessary, apply a second coat after a minimum interval of 6 hours at 20 ° C.

CATALOGUES
INTERIORS
PARQUET CATALOGUE
Skyline di Venezia / Venice Skyline
×

LEGENDA

loghettobps

ICON_CERT_EN713
CERTIFICATIONS AND CONFORMITY
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
ICON_CERT_IBR
Borma Wachs products are tested and approved by IBR, Intitut für Baubiologie Rosenheim. The performed analysis certify that our products are complying in terms of VOC content, biocides, heavy metals and radioactivity, guaranteeing full eco-compatibility with Green Building principles.
ICON_CERT_DIN
This product's safety is guaranteed more than just by EN 71-III certificate. Its safety for children is supported by DIN 53160/1-2 and DIN 68861/1 (Resistance to saliva and sweat; Resistance to cold liquids ) certificates as well. The product does not release harmful substances even when in contact with common alimentary liquids or mucuous membrane.
CERT_BFLS1
The product acts as fire retardant
CERT_DGALN_A
CERTIFICATIONS AND COMPLIANCE
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.

The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EC1
CERTIFICATIONS AND COMPLIANCE
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO
CERTIFICATIONS AND COMPLIANCE
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.