VOC FREE & UV CURING
3935.UV
Borma 100% BIOFAST OIL is a special blend of natural oils, waxes, resins, (with a high content of re-growing natural raw elements), and additives.
Borma 100% BIOFAST OIL dries and sets in few seconds upon UV light exposure (280/400 nm, Wave-length). The product grants extraordinary performances in terms of hardness and chemical resistance. Ideal for interior flooring as well as furniture, doors, skirting and interior wooden surfaces in general. Perfect for table tops. Suitable also for high traffic surfaces and project-based use, thanks to its high wear-resistance.
For professional use.
Product available in the 20 L version.
LOGIN
Apply evenly on the dry and clean surface, properly sanded. The application can be performed with rollers, brushes, abrasive pads, polishing machines or industrial roller-coaters.
Irradiate with UV lamps to cure the product.
Sand with fine grit (P220)
Apply the second coat the same way.
Irradiate with UV lamp to harden the product. The surface is immediately usable.
LEGENDA
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.
The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.