Wood Care Professional Products - Welcome to Borma Wachs
search

SPECIAL VARNISH FOR BOATS

code

3925XX

SDS code: 3925
Description

High solid, high quality lacquer, ready to use, with excellent elasticity and high filling power. Prevents cracks and flaking. Suitable both for interior and exterior use, also on exotic wood. Enriched with UV filters, it forms a considerably thick protective film, resistant to water and adverse weather conditions. Non-dripping.

For preliminary colouration of the surfaces, you can apply Holz Lasur exterior woodstain, then proceed to finish with two coats of Flatting Extra Marine. To ensure it lasts over time, Flatting Extra Marine can be directly pigmented with Oil Concentrates COXX.

Packaging
Glossy     Matt  
Code 3925 6 x 375ml   Code 3925-30 6 x 375ml
Code 3926 6 x 750ml   Code 3926-30 6 x 750ml
Code 3927 2 x 2,5Lt   Code 3927-30 2 x 2,5Lt
Code 3928.10 1 x 10Lt   Code 3928.10-30 1 x 10Lt
Code 3929 1 x 20Lt   Code 3929-30 1 x 20Lt

Available in satin (30 gloss) and gloss (80 gloss) finish.

img_certICON_LINE_ESTERNIICON_CERT_EN713ICON_CERT_UV_FILTERS
Method of Usage

1

Dilute 10-15% with Solvoil 04.


1

In case of raw supports, take care that the timber is well-aged, clean and dry proceeding then to apply a first coat of very diluted product (20-40%).


1

In case of restoring of old supports, first lightly sand the surface, in order to clean and uniform it; than apply a first coat.


1

Apply then a second coat after 24 hours, to allow correct drying to occur.

CATALOGUES
EXTERIORS
Skyline di Venezia / Venice Skyline
×

LEGENDA

loghettobps

ICON_CERT_EN713
CERTIFICATIONS AND CONFORMITY
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
ICON_CERT_IBR
Borma Wachs products are tested and approved by IBR, Intitut für Baubiologie Rosenheim. The performed analysis certify that our products are complying in terms of VOC content, biocides, heavy metals and radioactivity, guaranteeing full eco-compatibility with Green Building principles.
ICON_CERT_DIN
This product's safety is guaranteed more than just by EN 71-III certificate. Its safety for children is supported by DIN 53160/1-2 and DIN 68861/1 (Resistance to saliva and sweat; Resistance to cold liquids ) certificates as well. The product does not release harmful substances even when in contact with common alimentary liquids or mucuous membrane.
CERT_BFLS1
The product acts as fire retardant
CERT_DGALN_A
CERTIFICATIONS AND COMPLIANCE
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.

The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EC1
CERTIFICATIONS AND COMPLIANCE
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO
CERTIFICATIONS AND COMPLIANCE
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.