Wood Care Professional Products - Welcome to Borma Wachs
search

HARD TOP POLISH NATURAL SPRAY

HIGH RESISTANCE SHELLAC LACQUER

code

3921SN

SDS code: 3922
High Resistance Shellac Lacquer - HARD TOP POLISH NATURAL SPRAY - 3921SN
Description

Ready to use, highly resistant.
Produced with natural dewaxed shellac and completely natural resins.
Ideal for all those supports subject to heavy wear and on which you do not want to give up the aesthetic uniqueness of shellac.
Ready to use and colorless, it can be colored by adding small quantities of concentrated dye Holzfarbe.

Packaging

Cod. 3921N - 12 x 500ml
Cod. 3922N - 12 x 1Lt
Cod. 3923N - 2 x 5Lt

Cod. 3921SN - 12 x 400 ml. spray

img_certICON_LINE_RESTAURO
prod_icona_3
Technical Sheet
prod_icona_4
Safety Data Sheet
prod_icona_5
Info
Method of Usage

1

Before use, shake the container well for a few seconds.


1

Spray and adequate amount of product directly onto the surface at a distance of approx. 25 cm.


1

After a drying interval of 1/2 H, variable according to thickness and ambient temperature.


1

Sand down lightly using a grain of 240, followed by a second coat if necessary.

CATALOGUES
RESTORATION

Related products
1-2K NATURAQUA MOBILACK - Waterbased Lacquer for Furniture
NAT4122-XX
Show
FURNITURE CLEANER (Möbelreiniger) - Intensive Polishing Cleaner for Wood - Spray - Intensive Polishing Cleaner for Wood
0018
Show
Skyline di Venezia / Venice Skyline
×

LEGENDA

loghettobps

ICON_CERT_EN713
CERTIFICATIONS AND CONFORMITY
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-III norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
ICON_CERT_IBR
Borma Wachs products are tested and approved by IBR, Intitut für Baubiologie Rosenheim. The performed analysis certify that our products are complying in terms of VOC content, biocides, heavy metals and radioactivity, guaranteeing full eco-compatibility with Green Building principles.
ICON_CERT_DIN
This product's safety is guaranteed more than just by EN 71-III certificate. Its safety for children is supported by DIN 53160/1-2 and DIN 68861/1 (Resistance to saliva and sweat; Resistance to cold liquids ) certificates as well. The product does not release harmful substances even when in contact with common alimentary liquids or mucuous membrane.
CERT_BFLS1
The product acts as fire retardant
CERT_DGALN_A
CERTIFICATIONS AND COMPLIANCE
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.

The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EC1
CERTIFICATIONS AND COMPLIANCE
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO
CERTIFICATIONS AND COMPLIANCE
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.