Ready to use, highly resistant.
Produced with natural dewaxed shellac and completely natural resins.
Ideal for all those supports subject to heavy wear and on which you do not want to give up the aesthetic uniqueness of shellac.
Ready to use and colorless, it can be colored by adding small quantities of concentrated dye Holzfarbe.
Cod. 3921N - 12 x 500ml
Cod. 3922N - 12 x 1Lt
Cod. 3923N - 2 x 5Lt
Cod. 3921SN - 12 x 400 ml. spray
Evenly apply a few fine coats by spray or brush, diluting with Solve 100 if required. If applied by pad, aid spreading by pouring a few drops of special polishing oil on the surface.
Wait at least 30 minutes between one coat and another. Check the support is dry, apply the next coat.
If applied by spray, wait until it is completely dry after app. 16 hours, to create a more antique effect, spread Beeswax in paste form.
If applied by pad, after at least three applications, when completely dry, use a cloth dampened with special degreaser for shellac finishes to pass over the surface to remove any oil deposits and to exalt the full beauty of the finish.