Nadelholzbeize is a ready-to-use water-based stain that can be sprayed or applied by brush. The product highlights the natural beauty of wood grain and gives a wonderful aged finish. The product is recommended for indoor use and for open-pore woods such as fir tree. However, Nadelholzbeize is not recommended for very resinous woods (resin seepage may cause stains). Can be varnished once dry.
Code 3705 - 12 x 1Lt.
Code 3716 - 2 x 5Lt.
Surfaces must be unpainted, clean and free of dust, wax and grease.
Wasserbeize is ready-to-use. Mix the product well before use.
Spray the product quite generously on to the surface to be treated.
The product should be applied at room temperatures of 5-40°C.
Total drying time: 24 hours.
Sand the support in a longitudinal direction following the vein to obtain a first dye with a positive effect. Once you have the desired effect, finish with the oils and waxes of the Borma line.