SPECIAL INSULATING PRIMER
36302K
Two-component polyurethan insulating primer for wood, expressly designed for resinous woods Quick drying and excellent sandability, it allows to obtain closed/semi-closed pore finishes thanks to its high filling power.
Special for outdoor, it contains specific ingredients to protect the wood from the natural deteriorating agents as insulate exotic wood for better finishing compatibility. Overcoatable with one of our solvent- based finishes, with our water- based finishes (VM8510, Naturaqua Top Gel) and oil-based finishes such as Decking oil HD. It allows to carry out two-coat painting cycles (1 coat of base + one coat of paint).
Cod. 36312K + 3631K 5+5Lt
Cod. 36322K + 3632K 10+10Lt
Cod. 36332K + 3633K 20+20Lt
LOGIN
Properly sand the surface. Carefully remove the residues of dust, dirt, grease.
Shake well the paint and add the hardener in 1:1 ration. Still well. Wait 5 minutes, to allow defoaming, before use.
Apply by brush, roller or airless spray. Prior application a 20% dilution to be considered.
Wait for complete drying. Sand before applying the chosen finish. (180-220)
LEGENDA
Conformity EN 71.3 Toy safety - Part 3: Migration of certain items.
Eurofins danish laboratories have recognized the conformity of Borma Wachs oils to EN 71-3 norm, relating to the migration of harmful heavy metals, guaranteeing the safety of the treatments in such a way that they can also be safe for use on childrens' toys.
Labeling of construction products
This label covers the French legislation relating to emissions of volatile organic compounds (VOC) and the impact they have on indoor air quality after the product is brought into the room.
Labeling refers to the pollutants emitted once the products are spread and dried.
The IBR Green Building Institute had tested some of our products and determined that they correspond to the highest standards of the aforementioned French VOC legislation.
EMICODE EC1 - Low-emission building materials
Certified installation materials, adhesives and construction products
The EMICODE mark guarantees that the material has been tested and certified according to its emission level. Compared to 1997, low-emission building materials now have a TVOC value (total quantity of volatile organic compounds) from one hundred to one thousand times lower. The EMICODE mark is not issued if a building material is suspected of altering genetic makeup, causing cancer or impairing reproductive capacity.
APEO (alkylphenol ethoxylates)
APEOs (alkylphenol ethoxylates) are highly persistent chemicals, which are deposited in the tissues, penetrating, through them, into the food chain.
Recent studies demonstrate its toxicity and danger, as potential endocrine disruptors.
HACCP
Compliance with HACCP, an acronym for Hazard Analysis and Critical Control Points, means adhering to a food safety management system that aims to identify, evaluate and control hazards that can compromise the wholesomeness of food. In practice, it involves adopting preventive measures to ensure that food is safe for consumption.